{"id":2058,"date":"2024-02-14T09:17:22","date_gmt":"2024-02-14T09:17:22","guid":{"rendered":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/?post_type=product&p=2058"},"modified":"2024-02-14T09:39:21","modified_gmt":"2024-02-14T09:39:21","slug":"generic-compatible-01mbps-sfp-smf-1310nm-20km-transceiver","status":"publish","type":"product","link":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/product\/generic-compatible-01mbps-sfp-smf-1310nm-20km-transceiver\/","title":{"rendered":"OSP1250-3120xxR | 1.25Gb\/s SFP LX Optical Transceiver Module, Single Mode, 1310nm, 20km Reach"},"content":{"rendered":"

Applications<\/strong>
\n\u25cf 1G Fiber Channel, Switch to Switch Interface
\n\u25cf Gigabit Ethernet, Switched Backplane Applications
\n\u25cf Broadband aggregation and wireless infrastructure
\n\u25cf Router\/Server Interface
\n\u25cf Other Optical networking<\/p>\n

Description<\/strong>
\nOptcore OSP1250-3120xxR is high performance and cost-effective small form factor pluggable (SFP) transceiver
\nmodule for 1000BASE-LX\/LH Gigabit Ethernet per IEEE802.3z and 1G Fiber Channel application. It supports dual
\ndata-rate of 1.25Gbps\/1.06Gbps and 20km transmission distance with 9\/125um single mode fiber. This 1.25G SFP LX
\ntransceiver module fully complies with the SFP Multi-Sourcing Agreement (MSA) and can be used on MSA compliant
\nSFP ports of optical networking equipment. The transmitter section uses a 1310nm FP laser that is a class 1 laser
\nproduct compliant according to International Safety Standard IEC 60825. The receiver section uses a high-speed PIN
\nphotodiode integrated with a trans-impedance preamplifier (TIA).
\nThere are three versions of the series 1.25Gb\/s SFP LX optical transceiver modules for different applications. The
\nStandard grade (0~70\u00baC) is for commonly commercial application, the Extended grade (-10~85\u00baC) is for Extended
\ntemperature application, and the Industrial grade (-40~85\u00baC) is made with robust and reliable components to meet the
\nneeds of Industrial Ethernet application under harsh environmental conditions.<\/p>\n

 <\/p>\n

A<\/strong>b<\/strong>solute Maximum Ratings<\/strong><\/p>\n

 <\/p>\n\n\n\n\n\n\n
P<\/strong>arameter<\/strong><\/td>\nS<\/strong>ymbol<\/strong><\/td>\nM<\/strong>in<\/strong><\/td>\nM<\/strong>ax<\/strong><\/td>\nUnit<\/strong><\/td>\nNotes<\/strong><\/td>\n<\/tr>\n
Maximum Supply Voltage<\/td>\nVcc<\/td>\n-0.5<\/td>\n4.0<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
Storage Temperature<\/td>\n <\/p>\n

TS<\/td>\n

-40<\/td>\n85<\/td>\n\u00b0C<\/td>\n <\/td>\n<\/tr>\n
Operating Humidity<\/td>\nRH<\/td>\n5<\/td>\n95<\/td>\n%<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

R<\/strong>ecommended Operating Conditions<\/strong><\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n
P<\/strong>arameter<\/strong><\/td>\nS<\/strong>ymbol<\/strong><\/td>\nM<\/strong>in.<\/strong><\/td>\nT<\/strong>y<\/strong>p<\/strong>.<\/strong><\/td>\nM<\/strong>ax.<\/strong><\/td>\nUnit<\/strong><\/td>\nNotes<\/strong><\/td>\n<\/tr>\n
Power Supply Voltage<\/td>\nVcc<\/td>\n3.13<\/td>\n3.3<\/td>\n3.47<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
Power Supply Current<\/td>\nIcc<\/td>\n <\/td>\n <\/td>\n250<\/td>\nmA<\/td>\n <\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

Case Operating Temperature<\/td>\n

 <\/p>\n

 <\/p>\n

Tc<\/td>\n

0<\/td>\n <\/td>\n70<\/td>\n\u00b0C<\/td>\nStandard<\/td>\n<\/tr>\n
-10<\/td>\n <\/td>\n85<\/td>\n\u00b0C<\/td>\nExtended<\/td>\n<\/tr>\n
-40<\/td>\n <\/td>\n85<\/td>\n\u00b0C<\/td>\nIndustrial<\/td>\n<\/tr>\n
 <\/p>\n

Data Rate<\/td>\n

 <\/td>\n <\/td>\n1.25<\/td>\n <\/td>\nGbps<\/td>\nGigabit Ethernet<\/td>\n<\/tr>\n
 <\/td>\n <\/td>\n1.06<\/td>\n <\/td>\nGbps<\/td>\nFiber Channel<\/td>\n<\/tr>\n
Transmission Distance<\/td>\n <\/td>\n <\/td>\n <\/td>\n20<\/td>\nkm<\/td>\n9\/125\u00b5m SMF<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

O<\/strong>ptical Characteristics<\/strong><\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
P<\/strong>arameter<\/strong><\/td>\nS<\/strong>ymbol<\/strong><\/td>\nM<\/strong>in.<\/strong><\/td>\nT<\/strong>yp.<\/strong><\/td>\nM<\/strong>ax.<\/strong><\/td>\nUnit<\/strong><\/td>\nNotes<\/strong><\/td>\n<\/tr>\n
T<\/em><\/strong>r<\/em><\/strong>ansmitter<\/em><\/strong><\/td>\n<\/tr>\n
Center Wavelength<\/td>\n\u03bbC<\/td>\n1270<\/td>\n1310<\/td>\n1360<\/td>\nnm<\/td>\n <\/td>\n<\/tr>\n
Average Output Power<\/td>\nP0ut<\/td>\n-9<\/td>\n <\/td>\n-3<\/td>\ndBm<\/td>\n1<\/td>\n<\/tr>\n
Spectral Width (RMS)<\/td>\n\u03c3<\/td>\n <\/td>\n <\/td>\n4<\/td>\nnm<\/td>\n <\/td>\n<\/tr>\n
Extinction Ratio<\/td>\nER<\/td>\n9<\/td>\n <\/td>\n <\/td>\ndB<\/td>\n1<\/td>\n<\/tr>\n
Optical Rise\/Fall Time<\/td>\nTr-Tf<\/td>\n <\/td>\n <\/td>\n0.26<\/td>\nns<\/td>\n2<\/td>\n<\/tr>\n
Total Jitter<\/td>\n <\/td>\n <\/td>\n <\/td>\n0.431<\/td>\nUI<\/td>\n <\/td>\n<\/tr>\n
Output Optical Eye<\/td>\nCompliant with IEEE802.3 z (class 1 laser safety)<\/td>\n<\/tr>\n
Receiver<\/em><\/strong><\/td>\n<\/tr>\n
Center Wavelength<\/td>\n\u03bbC<\/td>\n1270<\/td>\n–<\/td>\n1610<\/td>\nnm<\/td>\n <\/td>\n<\/tr>\n
Receiver Sensitivity<\/td>\n <\/td>\n <\/td>\n <\/td>\n-22<\/td>\ndBm<\/td>\n3<\/td>\n<\/tr>\n
Receiver Overload<\/td>\n <\/td>\n-3<\/td>\n <\/td>\n <\/td>\ndBm<\/td>\n3<\/td>\n<\/tr>\n
LOS De-Assert<\/td>\nLOSD<\/td>\n <\/td>\n <\/td>\n-24<\/td>\ndBm<\/td>\n <\/td>\n<\/tr>\n
LOS Assert<\/td>\nLOSA<\/td>\n-35<\/td>\n <\/td>\n <\/td>\ndBm<\/td>\n <\/td>\n<\/tr>\n
LOS Hysteresis<\/td>\n <\/td>\n0.5<\/td>\n <\/td>\n6<\/td>\ndB<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

    \n
  1. Measured at 1.25Gbps with PRBS 27\u2013 1 NRZ test pattern.<\/li>\n<\/ol>\n

     <\/p>\n

      \n
    1. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps<\/a><\/li>\n<\/ol>\n

       <\/p>\n

        \n
      1. Measured at 1250 Mb\/s with PRBS 27\u2013 1 NRZ test pattern for BER < 1×10-12<\/li>\n<\/ol>\n

         <\/p>\n

         <\/p>\n

        E<\/strong>l<\/strong>ectrical Input\/Output Characteristics<\/strong><\/p>\n

         <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
        P<\/strong>arameter<\/strong><\/td>\nS<\/strong>ymbol<\/strong><\/td>\nM<\/strong>in.<\/strong><\/td>\nT<\/strong>yp.<\/strong><\/td>\nM<\/strong>ax.<\/strong><\/td>\nUnit<\/strong><\/td>\nNotes<\/strong><\/td>\n<\/tr>\n
        T<\/em><\/strong>r<\/em><\/strong>ansmitter<\/em><\/strong><\/td>\n<\/tr>\n
        Input differential impedance<\/td>\nZIN<\/td>\n <\/td>\n100<\/td>\n <\/td>\n\u03a9<\/td>\n <\/td>\n<\/tr>\n
        Data Input Swing Differential<\/td>\nVin,pp<\/td>\n300<\/td>\n <\/td>\n1600<\/td>\nmV<\/td>\n <\/td>\n<\/tr>\n
        TX Disable – High<\/td>\nVIH<\/td>\n2.0<\/td>\n <\/td>\nVcc+0.3<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        TX Disable – Low<\/td>\nVIL<\/td>\n0<\/td>\n <\/td>\n0.8<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        TX Fault – High<\/td>\nVOH<\/td>\n2.0<\/td>\n <\/td>\nVcc+0.3<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        TX Fault – Low<\/td>\nVOL<\/td>\n0<\/td>\n <\/td>\n0.5<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        Receiver<\/em><\/strong><\/td>\n<\/tr>\n
        Data Output Swing Differential<\/td>\nVout,pp<\/td>\n400<\/td>\n <\/td>\n1000<\/td>\nmV<\/td>\n <\/td>\n<\/tr>\n
        RX LOS – High<\/td>\nVLOS<\/td>\n2.0<\/td>\n <\/td>\nVcc+0.3<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        RX LOS – Low<\/td>\nVLOS<\/td>\n0<\/td>\n <\/td>\n0.8<\/td>\nV<\/td>\n <\/td>\n<\/tr>\n
        <\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

         <\/p>\n

        P<\/strong>i<\/strong>n Descriptions<\/strong><\/p>\n

         <\/p>\n\n\n\n\n
        P<\/strong>in<\/strong><\/td>\nS<\/strong>ignal Name<\/strong><\/td>\nDescription<\/strong><\/td>\nP<\/strong>lug Seq.<\/strong><\/td>\nNotes<\/strong><\/td>\n<\/tr>\n
        1<\/td>\nVEET<\/td>\nTransmitter Ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
        2<\/td>\nTX FAULT<\/td>\nTransmitter Fault Indication<\/td>\n3<\/td>\nNote 1<\/td>\n<\/tr>\n
        3<\/td>\nTX DISABLE<\/td>\nTransmitter Disable<\/td>\n3<\/td>\nNote 2<\/td>\n<\/tr>\n
        4<\/td>\nMOD_DEF(2)<\/td>\nSDA Serial Data Signal<\/td>\n3<\/td>\nNote 3<\/td>\n<\/tr>\n
        5<\/td>\nMOD_DEF(1)<\/td>\nSCL Serial Clock Signal<\/td>\n3<\/td>\nNote 3<\/td>\n<\/tr>\n
        6<\/td>\nMOD_DEF(0)<\/td>\nModel present indication<\/td>\n3<\/td>\nNote 3<\/td>\n<\/tr>\n
        7<\/td>\nRate Select<\/td>\nNot Connected<\/td>\n3<\/td>\n <\/td>\n<\/tr>\n
        8<\/td>\nLOS<\/td>\nLoss of Signal<\/td>\n3<\/td>\nNote 4<\/td>\n<\/tr>\n
        9<\/td>\nVEER<\/td>\nReceiver ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n
        10<\/td>\nVEER<\/td>\nReceiver ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n
        11<\/td>\nVEER<\/td>\nReceiver ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n
        12<\/td>\nRD-<\/td>\nInverse Received Data Out<\/td>\n3<\/td>\nNote 5<\/td>\n<\/tr>\n
        13<\/td>\nRD+<\/td>\nReceived Data Out<\/td>\n3<\/td>\nNote 5<\/td>\n<\/tr>\n
        14<\/td>\nVEER<\/td>\nReceiver ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n
        15<\/td>\nVCCR<\/td>\nReceiver Power Supply<\/td>\n2<\/td>\n <\/td>\n<\/tr>\n
        16<\/td>\nVCCT<\/td>\nTransmitter Power Supply<\/td>\n2<\/td>\n <\/td>\n<\/tr>\n
        17<\/td>\nVEET<\/td>\nTransmitter Ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n
        18<\/td>\nTD+<\/td>\nTransmit Data In<\/td>\n3<\/td>\nNote 6<\/td>\n<\/tr>\n
        19<\/td>\nTD-<\/td>\nInv. Transmit Data In<\/td>\n3<\/td>\nNote 6<\/td>\n<\/tr>\n
        20<\/td>\nVEET<\/td>\nTransmitter Ground<\/td>\n1<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

         <\/p>\n

        Notes:<\/strong><\/p>\n

          \n
        1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10k\u03a9 resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.<\/li>\n
        2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10k\u03a9 resistor. Its states are:<\/li>\n<\/ol>\n

          Low (0 to 0.8V): Transmitter on\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0(>0.8V, < 2.0V): Undefined<\/p>\n

           <\/p>\n

          High (2.0 to 3.465V): Transmitter Disabled\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0Open:Transmitter Disabled<\/p>\n

           <\/p>\n

            \n
          1. Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10k\u03a9 resistor on the host board. The pull-up voltage shall be VccT or VccR.<\/li>\n<\/ol>\n

            Mod-Def 0 is grounded by the module to indicate that the module is present<\/p>\n

             <\/p>\n

            Mod-Def 1 is the clock line of two wire serial interface for serial ID Mod-Def 2 is the data line of two wire serial interface for serial ID<\/p>\n

              \n
            1. LOS is an open collector output, which should be pulled up with a 4.7k~10k\u03a9 resistor. Pull up voltage between<\/li>\n<\/ol>\n

              2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the low state, the output will be pulled to less than 0.8V.<\/p>\n

                \n
              1. RD-\/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100\u03a9 (differential) at the user SERDES.<\/li>\n
              2. TD-\/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100\u03a9<\/li>\n<\/ol>\n

                differential termination inside the module.<\/p>\n

                 <\/p>\n

                 <\/p>\n

                Optcore 1.25Gb\/s SFP LX optical transceiver support the 2-wire serial communication protocol as defined in the SFP MSA. It is very closely related to the E2PROM defined in the GBIC standard, with the same electrical specifications. The standard SFP serial ID provides access to identification information that describes the transceiver\u2019s capabilities, standard interfaces, manufacturer, and other information.<\/p>\n

                 <\/p>\n

                Additionally, Optcore 1.25Gb\/s SFP LX optical transceiver provide an optional enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage<\/strong>.It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.<\/p>\n

                 <\/p>\n

                The SFP MSA defines a 256-byte memory map in E2PROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source Agreement.<\/p>\n

                 <\/p>\n

                The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver module. The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.<\/p>\n

                 <\/p>\n

                Digital diagnostics for this 1.25G SFP LX optical transceiver is internally calibrated by default.<\/p>\n","protected":false},"excerpt":{"rendered":"

                Features
                \n\u25cf Support Up to 1.25Gb\/s data links
                \n\u25cf Compliant with SFP MSA standard
                \n\u25cf Compliant with IEEE 802.3z
                \n\u25cf Hot pluggable SFP footprint
                \n\u25cf 1310nm FP laser transmitter and PIN photo-detector
                \n\u25cf Single 3.3V power supply
                \n\u25cf Duplex LC connector
                \n\u25cf Low power dissipation
                \n\u25cf Metal enclosure provides lower EMI
                \n\u25cf ROHS compliant and Lead Free
                \n\u25cf Operating Temperature: Standard 0~70\u00baC\u00a0\u00a0\u00a0\u00a0 Extended -10~85\u00baC\u00a0\u00a0\u00a0 Industrial -40~85\u00baC
                \n\u25cf Optional Digital Diagnostic Monitor Interface<\/p>\n

                Data Sheet<\/strong><\/a><\/p>\n","protected":false},"featured_media":2059,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":""},"product_brand":[],"product_cat":[652,606],"product_tag":[1163,1160,1161,1162,1159],"class_list":{"0":"post-2058","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-1-25gb","7":"product_cat-transceivers","8":"product_tag-1-25gb-s-sfp-lx-optical-transceiver-module-single-mode-1310nm-20km-reach","9":"product_tag-module-single-mode-1310nm-20km-reach","10":"product_tag-osp1250-3120xxr-1-25gb-s-sfp","11":"product_tag-osp1250-3120xxr-1-25gb-s-sfp-20km-reach","12":"product_tag-osp1250-3120xxr-1-25gb-s-sfp-lx-optical-transceiver-module-single-mode-1310nm-20km-reach","14":"first","15":"instock","16":"taxable","17":"shipping-taxable","18":"purchasable","19":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/product\/2058","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/comments?post=2058"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/media\/2059"}],"wp:attachment":[{"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/media?parent=2058"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/product_brand?post=2058"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/product_cat?post=2058"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/fiberwarehouse.co.za\/optic-fiber\/wp-json\/wp\/v2\/product_tag?post=2058"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}